Water bills can be one of the most expensive utilities, but there are ways to save. Here are 10 simple ways to save on your water bill:
1. Check for leaks. A small drip can waste a lot of water and increase your water bill. Check all faucets, pipes, and hoses for leaks and have them repaired as soon as possible.
2. Install low-flow fixtures. Low-flow showerheads and faucet aerators can save a lot of water and lower your water bill.
3. Don’t let the water run. When brushing your teeth or shaving, don’t let the water run the entire time. Turn it off while you’re lathering up.
4. Don’t water the sidewalk. Water your lawn and garden, not the sidewalk or street.
5. Water during the cooler hours. Water your lawn and garden in the morning or evening when it’s cooler outside. This will reduce evaporation and waste.
6. Collect rainwater. Use a rain barrel or other container to collect rainwater from your roof. This water can be used to water your lawn or garden.
7. mulch your garden. Mulch helps retain moisture in the soil and can reduce the need for watering.
8. Use a broom, not a hose, to clean your sidewalk or driveway. Sweeping is just as effective and uses a lot less water.
9. Check your toilet for leaks. A leaking toilet can waste a lot of water. Put a few drops of food coloring in the tank and see if it appears in the bowl before flushing. If it does, you have a leak that needs to be repaired.
10. Don’t use the toilet as a wastebasket. Only flush human waste and toilet paper down the toilet. Everything else should go in the trash.